Home » Portfolio Items » Preparative HPLC Columns 20 X 50 mm LC Column Preparative
Short Description:
uHPLs preparative hplc column to protect hplc column without affecting the effect of separating media and purification.
The characteristics of the preparative hplc columns are
1.The column length is short, and the inner diameter is large
In order to speed up the separation time and improve the separation efficiency, the incoming sample volume of preparative chromatography will be large, and the general preparative chromatography columns length is 50 mm-250 mm, while the inner diameter is 10 mm-50 mm.
2、High flow rate
The flow rate of the mobile phase is generally 10-20ml/min, which can improve the yield and reduce the production cost.
| Product Number | Product Description |
| HPCLL-200050-A180-010-M-3-2 | C18, 10 μm particle size, L × I.D. 50 cm × 20 mm |
| HPCLL-200050-A080-010-M-3-2 | C8, 10 μm particle size, L × I.D. 50 cm × 20 mm |
| HPCLL-200050-A040-010-M-3-2 | C4, 10 μm particle size, L × I.D. 50 cm × 20 mm |
| … | … |
Note: Before using the hplc column, it is advisable to perform a column performance test and keep the results as a reference for future evaluation of column performance changes. The results should be saved and used as a reference for future evaluation of column performance changes. The column should perform the column performance test.
The hplc column performance test should be performed by the conditions in the factory report (the conditions used in the factory test are the best conditions), and the measured results will be comparable. The factory report should perform the column performance test (the conditions used in the factory test are optimal). However, column performance may vary depending on the sample used, mobile phase, column temperature, etc.
uHPLCs special services:
1. All columns will be tested before delivery and a column efficiency report will be provided.
2. Column loading service is available.
Home Products HPLC Guard Columns 2.1 mm UHPLC direct-connect guard column with low dead volume design Revolutionary 2.1mm UHPLC Direct-Connect Guard Column Hardware Boost your UHPLC performance with the 2.1mm Direct-Connect Guard Column – superior protection, refined separation. Engineered for ultra-high-performance protection of your analytical columns. Features and Applications: ⭐ Key Features – 2.1 mm
New 2.1 Direct Connect HPLC Inline Filter Item Number : HP-IF-D2.1n Main Function 2.1mm High Pressure Inline Filter Directly Connect Unique Design Lower Dead-Volume Easy to Install 316L Stainless Steel 0.2μ，0.5μ，, 2μ Super High Pressure Stainless Steel Frit HPLC Frit accept pore size OEM Service Contact Us Features and Applications: The HPLC inline filter plays
Uridine 5’-triphosphate Trisodium Salt (UTP-Na₃) Reference Standard | CAS 19817-92-6 | High-Purity Reference Materiel Product Code: U-D25015X Chemical Name: Uridine 5’-triphosphate Trisodium Salt (UTP-Na₃) Category: Drug Impurity Standard CAS Number: 19817-92-6 Molecular Formula: C₉H₁₃N₂Na₃O₁₅P₃ Molecular Weight: 586.12 g/mol Purity: ≥ 95% Available Package Size: 25 mg Storage Conditions: -20 ℃ Special Requirements: Moisture & Air
WhatsApp us
